手机奔驰宝马押注技巧

6/2/2020 | 1 MINUTE READ

Marposs Offers Auto Die Match in Form/Thread Rolling

Originally titled 'Automatic Die Match Optimizes Form/Thread Rolling'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

手机奔驰宝马押注技巧Brankamp X5 option continuously monitors the rolling process.

Marposs’ Automatic Die Match (ADM) option for the Brankamp X5 in-process monitoring system automatically controls the die match in form or thread rolling if the dies are not aligned. The ADM feature helps the operator find an optimum setting during setup for dynamic operation at nominal machine speed. After setup, the Brankamp X5 system continuously monitors the rolling process, detecting rollbacks and automatically controlling the ADM if the dies are not aligned.

According to the company, in cold forming, the insertion of the blank into the forming tools plays a crucial role in process stability and reducing the potential of failures. This is particularly true in thread or form rolling with flat dies where the insertion of the blanks into the rolling tools significantly determines the quality of the forming. With ADM, the system transmits positioning information to the machine control system in the event there are changes in the vertical force signals. If the vertical force falls below the specified limit value, Brankamp X5 generates a corresponding warning message and the adjustment is stopped and only activated again when it is exceeded again. 

To ensure that the quality monitoring integrated into the process does not impair the productivity of the machine, the company says that the parts detected as faulty are separated from the good parts by a sorting device without interrupting the production. The X5 systems enable manufacturers to optimize machine efficiency, improve part quality and limit unplanned downtime and tooling costs, helping lead to 100% workpiece quality control.

RELATED CONTENT

  • In-Machine Gaging Automates Part Inspection

    SPC Innovations' line of in-machine gages may provide an automated solution to some of the issues with post-process inspection.

  • Determine Passivation of Stainless

    Properly cleaned stainless steel is naturally protected from corrosion by a thin, passive film. But this passive layer can be removed or scratched. A passivation meter measures the surface potential under controlled conditions.

  • Micro Measuring

    Making micro sized parts is one thing; measuring them is another.

Resources

手机棋牌输了几百万 怎么购买手机赌博软件 快钱彩票官网 怎么样进入赌单双软件 快乐棋牌游戏 怎么下载波克棋牌 快乐十分二十选八走势图 手机版彩票过滤工具 我爱彩票邀请码是多少 手机棋牌输钱追回